Concise Beam 4.66.0.0

[CZFXP]

File size: 18.3 MB

Concise Beam V4 is an easy to use program for the design of precast concrete beams. Concise Beam will perform a load analysis and design checks in accordance with the latest edition of ACI 318, CSA A23.3 & S6, AS3600, or NZ3101.1. Key code parameters can be customized to simulate other design codes. The beam can be conventionally reinforced, partially or fully pretensioned. It can model any cross-sectional shape and will allow the cross-section to vary prismatically (step-wise) over the length of the beam. A graphical editor allows the user to describe any cross-section, including voids.

Concise Beam works in two-dimensions using simple beam theory (ACI B-region) but will also account for torsion along the beam. Concise Beam is NOT able to perform any analysis or design checks required for disturbed regions (ACI D-region) such as at sudden changes in section, large openings, notches, or dapped ends. The user can work in metric or U.S. Customary (Imperial) units, with a variety of individual units (i.e. mm, cm, m), and switch back and forth at will. Libraries of industry standard cross-sections and materials are provided with Concise Beam. The standard libraries can be modified, extended and customized by the user.

Beam Layouts

Single simply-supported beam

Cantilevers at one or both ends

Analyze any user defined cross-section

All standardized loads, load cases, and combinations

Moving Loads, including highway live loads

Load distribution (including PCI hollowcore distribution)

Cast-in-place pour (topping or deck) definition with haunch

Shoring of Cast-in-place pour (point or continuous)

Reinforcement Options

Reinforced precast concrete beams

Full or partially-prestressed (pre-tensioned) precast concrete beams

Deflected, cut, and debonded tendons

Strand transfer and development options available

Advanced Engineering Capability

Uses detailed methods whenever appropriate

Strain-compatibility section analysis accounting for slippage and rupture

Lateral stability check of tall girders during lifting and transport

Shear check of hollowcore with filled cores

Strand and rebar slippage and over-strain check

Cracked section analysis

Transfer, lifting, and final stress analysis

Shored construction options

Torsion analysis

Interface shear design check

Deflection, camber, bearing movement estimates

Maximum crack width estimate

PCI Vibration Analysis for Walking and Rhythmic Activity

Follows recognized methods as used in the PCI Design Handbook, CPCI Metric Design Manual, and the NPCAA Precast Concrete Handbook.

Concise Beam is NOT able to perform any analysis or design checks required for disturbed regions (ACI D-region) such as at sudden changes in section, large openings, notches, or dapped ends.

Whats New

Corrected the length of the transfer length and interface shear force for horizontal shear at negative moments when using the Moment Region method.

Added new analysis reports for flexure, shear, and torsion which include the analysis results for each individual ULS load combination. These reports are for use on-screen only, they are not formatted for printing.

Homepage

      Code:

Code Select Expand

https://nitroflare.com/view/330C7D39D5A13A7/Concise.Beam.v4.66.0.0.Incl.Keygen.and.Patch-RLTS.rar

https://rapidgator.net/file/35c4860618a7b32d6187734302821ce3/Concise.Beam.v4.66.0.0.Incl.Keygen.and.Patch-RLTS.rar.html