(https://i.postimg.cc/N0LkK7Yf/8934-1.jpg)
This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless
LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to
transfer to a computer, Liveview function and Picture Control System are supported.
It also supports workflows of Nikon's exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX.
Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled
remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter.
In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.
Enhanced viewer function enables thumbnail display of images stored in a computer.
Compatible with the new functions of the Nikon D3/D300
Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary
images. This remarkably increases efficiency.
Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release
while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible.
It also supports Picture Control System of the cameras.
Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered
51-point AF can be controlled and displayed.
Fine tuning of the new white balance is available.
Integration with other Nikon software
Support for ViewNX browser and viewer software
Support for Capture NX photo-finishing software
Whats New
• Fixed an issue that the computer sometimes became low on memory while using Camera Control Pro 2.
System requirements:
- Only pre-installed version.
- Software is only supported in the desktop OS Windows 8.1.
Microsoft Windows 11
Microsoft Windows 10
- Software is compatible with 32 - and 64-bit versions of OS Windows 8.1, Windows 7 and Windows Vista.
This software works as a native 64-bit application under the 64-bit versions of Windows 10, 8.1, Windows 7 and Windows Vista.
processor
Intel Core 2 Duo or later
Memory (RAM)
For 32-bit version: at least 1 GB (recommended at least 2 GB)
For 64-bit version: at least 2 GB (at least 4 GB)[/center]
Code:
You are not allowed to view links.
Register or LoginPlease Say Thanks Keep Topic Live �